Solution
Support Center
About Us
ContactSecure Ways to Remove FRP Samsung J7 Prime to Get Back Full Access
Gideon Byron Published on October 10, 2025Unlock Android3-min reading
If you are having trouble bypassing the Google account lock on your Samsung J7, you are in the right place. The J7 is part of the Galaxy J series and comes with strict security that makes the process hard. Because of this, many people find it challenging to bypass the Samsung J7 FRP. To help you out, this write-up will show you four working methods to bypass Google account verification on your device without wasting too much time.
In this article:
Method 1: Bypass Samsung J7 (Prime) FRP via Odin
One of the strongest ways to bypass FRP Samsung J7 Prime is via Odin, a tool made by Samsung for flashing firmware. By loading a special file, you can remove the lock and get back full access to the phone. This method is more advanced than app-based options, so it needs careful steps. You must use the right firmware, proper drivers, and know that data loss can happen.
Download Odin Samsung Flash Tool from a reliable source. You also need to get the FRP Bypass firmware for Samsung G610F (J7 Prime) from a trusted firmware site. Then, please install the latest Samsung USB drivers on your computer so it can detect your phone.
Turn off your Samsung J7. Now, press and hold Volume Down + Home + Power at the same time. A warning screen will appear. Press Volume Up to continue. Your phone is now in Download Mode.
Use a good USB cable to connect your Samsung J7 to your computer. Open the Odin tool on your computer. Once the phone is detected, a blue box will show up inside Odin. It means the tool sees your device and is ready to work.
In Odin, click the AP button. Find and select the FRP Bypass firmware file you downloaded earlier. Make sure that only Auto Reboot and F.Reset Time are checked in Odin. Do not change other options because it may cause issues.
Now, click Start in Odin. Please wait for the tool to finish flashing. You will see a PASS message when it is complete. Your phone will reboot on its own. If it does not restart, hold the Power button to reboot it manually. After this step, the FRP lock should be removed from your Samsung J7.
Method 2: Bypass Samsung J7 (Prime) FRP Using SideSync
A good option when an OTG cable is not available is the SideSync app. It is an official Samsung program made to link a phone with a computer over USB or Wi-Fi. Once connected, it gives access to apps like Chrome or Galaxy Apps, which help in setting up the bypass tool. The method is less complex than flashing, but it still needs the right setup and a stable connection.
Check out how FRP bypass for Samsung J7 Prime works using SideSync:
Start by downloading the SideSync app from Samsung's official site. Once installed, connect your Samsung J7 to the computer using a real Samsung USB cable. Once the phone is detected, a pop-up will appear. Choose Google Chrome to move forward.
After Chrome opens on your phone, type this link in the URL bar: https://goo.gl/iao0ya. It will let you download the Google verification bypass tool APK. Once the file is downloaded, go back to the main menu and tap on Galaxy Apps.
Inside Galaxy Apps, search for ES File Explorer. Install it on your device. After the installation is complete, you will see an option to open it.
In ES File Explorer, go to the Downloads folder where the APK file is saved. Tap on it. If a warning pops up, pick Settings and allow installation from unknown sources. After that, tap Install and please wait until it finishes. Once done, press Open to launch the bypass tool.
Inside the app, search for Google Account Manager. Choose the option Type email and password. It will take you back to Chrome, where you can sign in with your own Google account. After logging in, your phone will be unlocked from FRP, and you can use it without limits.
Method 3: Bypass Samsung J7 (Prime) FRP via QuickShortcutMaker
Another way to bypass FRP Samsung J7 is through the QuickShortcutMaker APK. Unlike other methods, this one depends on creating a shortcut inside the system that leads straight to the Google Account Manager. From there, you can log in with your own details and unlock the phone.
Turn on your Samsung J7 and set it up until you reach the Google verification screen. When asked for a phone number or email, type any random text. Long-press on it and tap the Hamburger button. From the list, choose Assist. Deny the help message and tap on the Google search bar that shows up.
In the search bar, look for the Google Account Manager APK and download it. Do the same for the QuickShortcutMaker. Both files will be saved in the Downloads section of your phone.
Go to your Downloads folder and open the Google Account Manager APK. If you see a message about blocked installs, head to Settings and allow apps from unknown sources. Then, continue and follow the instructions until the app is installed.
Once the first app is done, go back to your Downloads and open the QuickShortcutMaker. Allow unknown sources again if needed. Then, install it by following the same steps. When the installation is complete, press to open the app.
Inside QuickShortcutMaker, look for Google Account Manager. Choose the option that says Type email and password. It will bring up a login screen. Enter your own Google account email and password. After signing in, the FRP lock will be removed, and your Samsung J7 will be ready to use.
As you notice, it is simple, direct, and does not need extra apps like SideSync, but it requires patience and careful steps to work well if you want to bypass Google verification.
Method 4. Bypass Samsung J7 (Prime) FRP with an All-in-one Unlock Tool
An All-in-one Unlock Tool is the fastest way to deal with a locked phone, and for the Samsung J7, nothing works better than imyPass AnyPassGo. This program is built to bypass Samsung J7 FRP without stress. Not only J7, but also other Samsung models, and of course, other popular brands.
With it, you do not need to jump through long steps or search across many sites and apps. The process is simple, safe, and straight to the point. In fact, you can finish the task in just one minute. The success rate is super high, so you can really put your trust in it.
First and foremost, download and install imyPass AnyPassGo from the primary website, or you can just rely on the Download button below for easier access.
Once installed, open the program and select the option Bypass Google FRP Lock. This feature can help you remove the Google account lock on Samsung phones.
Use a USB cable and select Samsung from the list in the program.
The All models bypass FRP option is automatically selected, so what you need to do now is click the Bypass Now button. On your phone, press EMERGENCY CALL and enter either *#0*# or *#*#88#*#*. Then, click the Next button in the lower-right. If asked, allow USB debugging on your phone so the program can continue.
imyPass AnyPassGo will now set up the needed files to remove the FRP lock. In a few minutes, your Google account lock will be removed. You can now use your Samsung J7 without restrictions.
Besides FRP removal, imyPass AnyPassGo can also unlock a Samsung phone screen without a password, making it a full solution for Android users.
Conclusion
So, you have learned how to bypass FRP Samsung J7 Prime via Odin, SideSync, QuickShortcutMaker, and with imyPass AnyPassGo. Which one do you think is easier to use? The one that lets you finish the bypass in the shortest time? Of course, that is imyPass AnyPassGo; it saves effort and gives a high success rate.
Gideon is a senior editor from imyPass. He is an expert in unlocking phones and computers, and he has written password tutorials in imyPass for 3 years.
Hot Solutions
-
Unlock Android
-
Unlock iOS
-
Password Tips
-
iOS Tips
